Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
followed by the name of
the VRF to configure this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
static
(OPTIONAL) Enter the keyword
static
to view static
multicast routes.
group-address
[
source-
address
]
(OPTIONAL) Enter the multicast group-address to view only
routes associated with that group. Enter the source-address
to view routes with that group-address and source-address.
count
(OPTIONAL) Enter the keyword
count
to view the number of
multicast routes and packets.
snooping [vlan
vlan-id
]
[
group-address
[
source-
address
]]
Enter the keyword
snooping
to display information on the
multicast routes PIM-SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the
multicast routes PIM-SM snooping discovers on a specified
VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit
the information displayed to the multicast routes PIM-SM
snooping discovers for a specified multicast group and
source.
summary
(OPTIONAL) Enter the keyword
summary
to view a summary
of all routes.
vlt
(OPTIONAL) Enter the keyword
vlt
to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group and optionally a source multicast address in
dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword
count
to display the total number of multicast routes with
the spanned IIF.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
1210
Multicast
