Defaults
Disabled.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
If you configure the
set ipv6 next-hop
command in ROUTE-MAP mode, its
configuration takes precedence over the
neighbor next-hop-self
command.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} password [
encryption-
type
] password
To delete a password, use the
no neighbor {
ip-address
|
peer-group-
name
} password
command.
Parameters
ip-address
Enter the IP address of the router to be included in the peer
group.
peer-group-
name
Enter the name of a configured peer group.
encryption-
type
(OPTIONAL) Enter
7
as the encryption type for the password
entered.
7
means that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first
character of the password must be a letter.
You cannot use spaces in the password.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
422
Border Gateway Protocol
