Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.0
Introduced on the E-Series.
Usage
Information
You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when
creating a static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.
Related
Commands
clear arp-cache
— clears dynamic ARP entries from the ARP table.
show arp
— displays the ARP table.
arp backoff-time
Set the exponential timer for resending unresolved ARPs.
Z9500
Syntax
arp backoff-time
seconds
Parameters
seconds
Enter the number of seconds an ARP entry is black-holed.
The range is from 1 to 3600. The default is
30
.
Defaults
30
Command
Mode
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
IPv4 Routing
925
