neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
Z9500
Syntax
neighbor {
ipv6-address
|
peer-group-name
} activate
To disable, use the
no neighbor {
ipv6-address
|
peer-group-name
}
activate
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Identify a peer group by name.
activate
Enter the keyword
activate
to enable the identified
neighbor or peer group in the new AFI/SAFI.
Defaults
Disabled.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
By default, when you create a neighbor/peer group configuration in the Router
BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the
new context, the neighbor/peer group is enabled for AFI/SAFI.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Z9500
Syntax
neighbor {
ipv6-address
|
peer-group-name
} advertisement-
interval
seconds
To return to the default value, use the
no neighbor {
ipv6-address
|
peer-
group-name
} advertisement-interval
command.
Border Gateway Protocol
537
