Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.8(0.0)
Introduced on the S6000, Z9500, S6000-ON.
Related
Commands
show running-config monitor session
— displays information about monitor
configurations.
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax
monitor session
session-ID
[type { rpm | erpm [set ip dscp
dscp_value
| set ip ttl
ttl_value
]}] [drop]
To delete a session, use the
no monitor session
session-ID
command.
To delete all monitor sessions, use the
no monitor session all
command.
Parameters
session-ID
Enter a session identification number. The range is from 0 to
65535.
type
Specifies one of the following type:
•
rpm
•
erpm
rpm
Creates a remote port monitoring (rpm) session.
erpm
Creates an encapsulated remote port monitoring (erpm)
session.
set ip dscp
Configures the Differentiated Services Code Point (DSCP)
value of the packets in the Encapsulated Remote Switched
Port Analyzer (ERSPAN) traffic. To revert to the default value,
use the no form of this command.
dscp_value
DSCP value of the packets in the ERSPAN traffic. The range is
from 0 to 63. The default value is 0.
set ip ttl
Configures the IP time-to-live (TTL) value of the
Encapsulated Remote Switched Port Analyzer (ERSPAN)
traffic. To revert to the default configuration, use the no form
of this command.
Port Monitoring
1437
