Communities :
200:1 1000:1 3000:1
show ip bgp dampened-paths
View BGP routes that are dampened (non-active).
Z9500
Syntax
show ip bgp [vrf
vrf-name
] [ipv4 {
multicast
|
unicast
} | ipv6
unicast
] dampened-paths
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keywords
vrf
and then the name of
the VRF to view routes that are affected by a specific
community list corresponding to that VRF.
ipv4
unicast
(OPTIONAL) Enter the keywords
ipv4
followed by the
keyword
unicast
to view information related only to ipv4
unicast routes.
ipv6 unicast
(OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to view information related only to ipv6
unicast routes.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added the ipv4 multicast and ipv6 unicast parameters.
9.4(0.0)
Added support for VRF.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Border Gateway Protocol
457
