Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
neighbor distribute-list
Distribute BGP information via an established prefix list.
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} distribute-list
prefix-
list-name
{in | out}
To delete a neighbor distribution list, use the
no neighbor {
ip-address
|
peer-group-name
} distribute-list
prefix-list-name
{in | out}
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to apply the distribute list
filter to all routers in the peer group.
prefix-list-
name
Enter the name of an established prefix list.
If the prefix list is not configured, the default is
permit
(to
allow all routes).
in
Enter the keyword
in
to distribute only inbound traffic.
out
Enter the keyword
out
to distribute only outbound traffic.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Border Gateway Protocol
413
