Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on S-Series Stacking.
8.1.1.0
Introduced on the E-Series ExaScale.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage
Information
Dell Networking OS version 7.8.1.0 and later enhances the sflow implementation
for real time traffic analysis on the E-Series to provide extended gateway
information in cases where the destination IP addresses are learned by different
routing protocols and for cases where the destination is reachable over ECMP.
Related
Commands
show sflow
— displays the sFlow configuration.
sflow max-header-size extended
Set the maximum header size of a packet to 256 bytes.
Syntax
sflow max-header-size extended
To reset the maximum header size of a packet, use the
[no] sflow max-
header-size extended
command.
Parameters
extended
Enter the keyword
extended
to copy 256 bytes from the
sample packets to sFlow datagram.
Defaults
128
bytes
Command
Modes
CONFIGURATION
INTERFACE
1696
sFlow
