peer-group
peer-group-
name
Enter the keywords
peer-group
followed by the name of a
configured peer group. The maximum is 16 characters.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
You can assign up to 64 peers to one peer group.
When you add a peer to a peer group, it inherits all the peer group’s configured
parameters. A peer cannot become part of a peer group if any of the following
commands are configured on the peer:
•
neighbor advertisement-interval
•
neighbor distribute-list
•
neighbor route-map
•
neighbor route-reflector-client
•
neighbor send-community
A neighbor may keep its configuration after it was added to a peer group if the
neighbor’s configuration is more specific than the peer group’s, and the neighbor’s
configuration does not affect outgoing updates.
A peer group must exist before you add a peer to it. If the peer group is disabled
(shutdown), the peers within the group are also disabled (shutdown).
Related
Commands
•
clear ip bgp
– resets BGP sessions.
•
neighbor peer-group (creating group)
– creates a peer group.
•
show ip bgp peer-group
– view BGP peers.
•
show ip bgp neighbors
show ip bgp neighbors View BGP neighbors
configurations.
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Z9500
Syntax
neighbor
peer-group-name
peer-group
546
Border Gateway Protocol
