Version
Description
9.7(0.0)
Added support for VRF and Introduced on the S6000-ON.
9.5(0.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the C-Series and S-Series.
7.7.1.0
Introduced on the E-Series.
Usage
Information
Mapping applies to both v1 and v2 IGMP joins; any updates to the ACL are reflected
in the IGMP groups. You may not use extended access lists with this command.
When you configure a static SSM map and the router cannot find any matching
access lists, the router continues to accept (*,G) groups.
Related
Commands
ip access-list standard
— creates a standard access list to filter based on IP address.
ip igmp static-group
Configure an IGMP static group.
Z9500
Syntax
ip igmp static-group {
group address
[exclude [
source address
]]
| [include {
source address
}]}
To delete a static address, use the
no ip igmp static-group {
group
address
[exclude [
source address
]] | [include {source
address}]}
command.
Parameters
group address
Enter the group address in dotted decimal format (A.B.C.D).
exclude
source
address
(OPTIONAL) Enter the keyword
exclude
then the source
address, in dotted decimal format (A.B.C.D), for which a
static entry is added.
include
source
address
(OPTIONAL) Enter the keyword
include
then the source
address, in dotted decimal format (A.B.C.D), for which a
static entry is added.
Defaults
none
Command
Modes
INTERFACE
Internet Group Management Protocol (IGMP)
815
