show cam pbr
Display the PBR CAM content.
Z9500
Syntax
show cam pbr {[interface
interface
] | linecard
slot-number
port-set
number
]} [summary]
Parameters
interface
interface
Enter the keyword
interface
then the name of the
interface.
linecard
number
Enter the keyword
linecard
then the slot number. The
range is from 0 to 2 .
port-set
number
Enter the keywords
port-set
then the port-pipe number.
The port-pipe number is from 0 to 3.
summary
Enter the keyword
summary
to view only the total number of
CAM entries.
Defaults
none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.4(0.0)
Introduced on the S4810, S4820T, S6000, and Z9000.
7.4.1.0
Introduced.
Usage
Information
The
show cam pbr
command displays the PBR CAM content.
Example
Dell#show cam pbr linecard 0 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp
Next-hop Egress
Index Flag Port Port MAC Port
---------------------------------------------------------------
--------------
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:00:ab:9c:ed Vl 1001(0/2)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:24 Vl 1002(0/2)
1432
Policy-based Routing (PBR)
