packets 191402152148
bytes)
seq 20 permit any any ev2 eq 806 count bytes (74481486 packets
5031686754
bytes)
seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets
797843521 bytes)
Related
Commands
mac access-list standard
— configures a standard MAC access list.
show mac accounting access-list
— displays MAC access list configurations and
counters (if configured).
permit
To pass packets matching the criteria specified, configure a filter.
Z9500
Syntax
permit {any | host
mac-address
|
mac-source-address mac-source-
address-mask
} {any | host
mac-address
|
mac-destination-address
mac-destination-address-mask
} [
ethertype operator
] [count
[byte]] | [log [interval
minutes
] [threshold-in-msgs [count]]
[monitor]
To remove this filter, you have two choices:
• Use the
no seq
sequence-number
command if you know the filter’s
sequence number.
• Use the
no permit {any | host
mac-address
|
mac-source-address
mac-source-address-mask
} {any |
mac-destination-address mac-
destination-address-mask
}
command.
Parameters
any
Enter the keyword
any
to forward all packets.
host
Enter the keyword
host
then a MAC address to forward
packets with that host address.
mac-source-
address
Enter a MAC address in nn:nn:nn:nn:nn:nn format.
mac-source-
address-mask
(OPTIONAL) Specify which bits in the MAC address must
match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
mac-
destination-
address
Enter the destination MAC address and mask in
nn:nn:nn:nn:nn:nn format.
290
Access Control Lists (ACL)
