Version
Description
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
rmon collection history
Enable the RMON MIB history group of statistics collection on an interface.
Z9500
Syntax
rmon collection history {controlEntry
integer
} [owner
name
]
[buckets
number
] [interval
seconds
]
To remove a specified RMON history group of statistics collection, use the
no
rmon collection history {controlEntry
integer
}
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON group of statistics.
The integer value must be a unique index in the RMON
history table.
owner
name
(OPTIONAL) Enter the keyword
owner
then the owner name
to record the owner of the RMON group of statistics.
buckets
number
(OPTIONAL) Enter the keyword
buckets
then the number of
buckets for the RMON collection history group of statistics.
The bucket range is from 1 to 1000. The default is
50
.
interval
seconds
(OPTIONAL) Enter the keyword
interval
then the number
of seconds in each polling cycle. The range is from 5 to 3600
seconds. The default is
1800 seconds
.
Defaults
none
Command
Modes
CONFIGURATION INTERFACE (config-if)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Remote Monitoring (RMON)
1563
