exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
Z9500
Syntax
exec-timeout
minutes
[
seconds
]
To return to default settings, use the
no exec-timeout
command.
Parameters
minutes
Enter the number of minutes of inactivity on the system
before disconnecting the current session. The range is from
0 to 35791. The default is
10 minutes
for the console line
and
30 minutes
for the VTY line.
seconds
(OPTIONAL) Enter the number of seconds. The range is from
0 to 2147483. The default is
0 seconds
.
Defaults
10 minutes
for console line;
30 minutes
for VTY lines;
0 seconds
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
E-Series
Original command.
Usage
Information
To remove the time interval, enter
exec-timeout 0 0
.
Example
FTOS con0 is now available
Press RETURN to get started.
Dell>
Control and Monitoring
107
