-v {1 | 2}
(OPTIONAL) Enter the keyword
-v
then the SSH version 1 or
2. The default is the version from the protocol negotiation.
Defaults
As shown in the
Parameters
section.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Added support for the following ciphers and HMAC
alogorithms on the Z9000, S6000, S4820T, S4820T.
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
•
hmac-sha2-256
•
hmac-sha2-256-96
9.4(0.0)
Added support for VRF.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.12.0
Added support for the
-c
and
-m
parameters on the S4810.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Added IPv6 support. Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Usage
Information
Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
Example
Dell#ssh 10.11.8.12 ?
-c Encryption cipher to use (for v2 clients only)
-l User name option
-m HMAC algorithm to use (for v2 clients only)
Security
1675
