permit
— configures a permit filter.
ip access-list standard
Create a standard IP access list (IP ACL) to filter based on IP address.
Z9500
Syntax
ip access-list standard
access-list-name
To delete an access list, use the
no ip access-list standard
access-
list-name
command.
Parameters
access-list-
name
Enter a string up to 140 characters long as the ACL name.
Defaults
All IP access lists contain an implicit “deny any”; that is, if no match occurs, the
packet is dropped. ACL permit/deny rules are applied when a packet matches the
condition in an entry.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.10.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Increased the name string to accept up to 140 characters.
Prior to version 7.8.1.0, names are up to 16 characters long.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
Added support for the non-contiguous mask and added the
monitor
option.
6.5.1.0
Expanded to include the optional QoS
order
priority for the
ACL entry.
Access Control Lists (ACL)
225
