Destination address : a::2
Destination mask : /128
Destination port : 21
source-interface name :
source-interface num :
Match sequence Num : 3
Protocol type : tcp
IP or IPv6 : IPv6
Source address : a::1
Source mask : /128
Source port : 21
Destination address : a::2
Destination mask : /128
Destination port : 0
source-interface name :
source-interface num :
Dell#
transform-set
Specify the transform set the crypto policy uses.
Z9500
Syntax
transform-set
transform-set-name
To delete a transform set from the crypto policy, use the
no transform-set
transform-set-name
command.
Parameters
transform-set-
name
Enter the name for the crypto policy transform set.
Defaults
none
Command
Modes
CONFIG-CRYPTO-POLICY
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Descrption
9.2(1.0)
Introduced on the Z9500.
9.2(0.0)
Introduced on the Z9000, S4810, and S4820T.
Internet Protocol Security (IPSec)
923
