Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
7.6.1.0
Introduced on the E-Series.
Usage
Information
This mode changes the prompt.
Example
Dell(conf)#ip extcommunity-list test
Dell(conf-ext-community-list)#
match extcommunity
To match an extended community in the Route Map mode, use this feature.
Z9500
Syntax
match extcommunity {
extended community list name
}
To change the match, use the
no match extcommunity {
extended
community list name
}
command.
Parameters
extended
community list
name
Enter the name of the extended community list.
Defaults
none
Command
Modes
ROUTE MAP (config-route-map)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
494
Border Gateway Protocol
