Usage
Information
If you enter
bgp dampening
, the default values for
half-life
,
reuse
,
suppress
, and
max-suppress-time
are applied. The parameters are position-
dependent; therefore, if you configure one parameter, you must configure the
parameters in the order they appear in the command.
Related
Commands
show ip bgp dampened-paths
– views the BGP paths.
bgp default local-preference
Change the default local preference value for routes exchanged between internal BGP peers.
Z9500
Syntax
bgp default local-preference
value
To return to the default value, use the
no bgp default local-preference
command.
Parameters
value
Enter a number to assign to routes as the degree of
preference for those routes. When routes are compared, the
higher the degree of preference or local preference value,
the more the route is preferred. The range is 0 to
4294967295. The default is
100
.
Defaults
100
Command
Modes
ROUTER BGP
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
The
bgp default local-preference
command setting is applied by all routers
within the AS.
bgp enforce-first-as
Disable (or enable) enforce-first-as check for updates received from EBGP peers.
Z9500
Syntax
bgp enforce-first-as
To turn off the default, use the
no bgp enforce-first-as
command.
512
Border Gateway Protocol
