Usage
Information
To control access to command modes, use this command to define a password for
a level and use the
privilege level (CONFIGURATION mode)
command.
Passwords must meet the following criteria:
• Start with a letter, not a number.
• Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password
abcd]e
, you type “
abcd CNTL
v ]e
”. When the password is created, you do not use the CNTL + v key
combination and enter “
abcd]e
”.
NOTE: The question mark (?) and the tilde (~) are not supported characters.
Related
Commands
show running-config
— views the current configuration.
privilege level (CONFIGURATION mode)
— controls access to the command
modes within the switch.
enable restricted
Allows Dell Networking technical support to access restricted commands.
Z9500
Syntax
enable restricted [
encryption-type
] password
To disallow access to restricted commands, use the
no enable restricted
command.
Parameters
encryption-
type
(OPTIONAL) Enter the number
7
as the encryption type.
Enter
7
followed a text string as the hidden password. The
text string must be a password that was already encrypted by
a Dell Networking router.
Use this parameter only with a password that you copied
from the
show running-config
file of another Dell
Networking router.
password
Enter a text string, up to 32 characters long, as the clear text
password.
Defaults
Not configured.
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
1616
Security
