buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
Z9500
Syntax
buffer-profile {fp | csf]
profile-name
{global {1Q | | 4q}
Parameters
fp
Enter the keyword
fp
to create a buffer profile for the Field
Processor.
csf
Enter the keyword
csf
to create a buffer profile for the
Switch Fabric Processor.
profile-name
Create a name for the buffer profile,
global
Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
1Q
Enter the keyword
1Q
to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
4Q
Enter the keyword
4q
to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Defaults
Dynamic
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.2(0.2)
Changed the default value from global 4q to Dynamic.
8.3.19.0
Introduced on the S4820T.
8.3.11.0
Introduced on the Z9000.
7.8.1.0
Added the
global
keyword.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
Usage
Information
The
buffer-profile global
command fails if you have already applied a
custom buffer-profile on an interface. Similarly, when you configure
buffer-
profile global
, you cannot not apply buffer-profile on any interface.
Debugging and Diagnostics
661
