Z-Wave Home Automation Solutions
Being one of the most advanced Home Automation systems to date, Z-Wave is
reliable, affordable and most importantly fully wireless, thus easy to assemble
without laying down expensive cables.
The whole Z-Wave Home Automation system is based around the central home
controller. It monitors the states of the devices around it and sends the information
to the central controller using a secure encrypted channel or to your smartphone
or PC using an internet connection. It allows the user to remotely change the state
of their devices using a smartphone by first decrypting a message and then
forwarding it to the desired device. The central home controller can also be set to
automatically turn devices ON/OFF, when for example a sensor is tripped.
Z-Wave devices are not only able to communicate with the home controller but
also any nearby devices in the network. They are also capable of forwarding
commands from the home controller to neighboring devices, effectively increasing
the range of your network and assuring its responsiveness is not only fast but also
reliable.
For example you can configure your Z-Wave system to automatically turn on the
siren when a motion sensor is tripped. You can also configure your Z-Wave network
to send you automated notifications via SMS or email and to save pictures or
footage depending on which devices become tripped in your home. You can
arm or disarm your system on the go with your smart phone or at home with a
conveniently placed switch. You can schedule your light go ON and OFF depends
on time of the day, your presents at home or other triggers or events. Not only does
Z-Wave allow you to remotely monitor and control your home it also allows you to
create unlimited scenarios to enhance your way of life. You can automatically
switch on your sirens when an alarm is triggered or turn off your child’s night lamp
when they fall asleep. The list of possibilities is endless...
You don’t have to build your entire home automation system in one go. You
can add new devices to your Z-Wave network whenever you wish allowing
you to tailor your system to your ever-changing needs.
DHS Z-Wave Plug-In Switch with energy metering is a Z-Wave enabled device
for Home Automation system which can:
•
control ON/OFF a lamp or an appliance remotely by Z-Wave
gateway / app or manually by the push button on the device
•
measure and report the power that is consumed through the
socket (connected load)
•
has LED light switch status indication (ON and OFF)
•
can be used as a repeater in Z-Wave network
Package Contents
1) DHS Z-Wave Plug-In Switch
2) Quick Installation Guide
Specifications:
Item
Description
RF Protocol
Z-Wave
Z-wave device type
POWER SWITCH BINARY / ROUTING SLAVE
Operating Voltage
AC 230V / 50Hz
Maximum load
2200W, 10A
RF Frequency
921.42Mhz AU/NZ
Operating humidity:
30% to 80%
Operation Range
Up to 30m when no obstacles
Application
Indoor use only
Operation
Temperature
0 ° C to 50 ° C
Storage
Temperature
-5 ~ +65 °C
Weight
150g
Housing
ABS
Certification
RCM, SAA Approvals SAA-152104-EA
PLEASE NOTE:
The device plugged into the Z-Wave™ controlled outlet on this Plug-In Switch must
not exceed 2200 watts (50hz, 10A).
Specifications are subject to change without further notice
The information in this document is subject to change without notice. Digital Home Systems Pty
Ltd (DHS) does not make any representations or warranties (implied or otherwise) regarding the
accuracy and completeness of this document and shall in no event be liable for any loss of profit
or any commercial damage, including but not limited to incidental, consequential or other damage.
TRADEMARKS
All trademarks and registered trademarks are the property of their respective owners or
companies.
DHS One (1) Year Limited Warranty
Digital Home Systems Pty Ltd warrants this DHS branded hardware product against defects in
materials and workmanship under normal use for period of one (1) year from the date of retails
purchase by the original end user purchaser (‘Warranty Period’). PLEASE NOTE: breaking security
label will void the warranty.
Terms and conditions
To see complete terms and conditions browse to
http://www.digitalhomesystems.com.au/DHS_Terms_and_conditions.pdf
Quick Installation Guide
DHS Z-Wave Plug-In Switch
With Energy Measuring
CATALOGUE NO:
DHS-LIT-SWP-DHS
