Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 930 / 1646

2 To display contour lines in a site plan, do the following:
■
Select At Intervals Of and enter a value for contour line intervals. This value determines the
elevation at which contour lines display.
■ For Passing Through Elevation, enter a value to set the starting elevation for contour lines.
By default, Passing Through Elevation is set to zero. If you set the contour interval to 10, for
example, lines display at -20, -10, 0, 10, 20. If you set the Passing Through Elevation value
to 5, lines display at -25, -15, -5, 5, 15, 25.
3 To add custom contour lines to a site plan, click Insert, and specify the following values:
■ Start: Enter the elevation where additional contour lines begin to display.
■ Stop: Enter the elevation at which additional contour lines no longer display. This value is
enabled when you select Multiple Values for Range Type.
■ Increment: Specify the increment for each additional contour line. This value is enabled
when you select Multiple Values for Range Type.
■ Range Type: For one additional contour line, select Single Value. For multiple contour lines,
select Multiple Values.
■ Subcategory: Specify the line style for the contour line. The default styles are Hidden Lines,
Primary Contours, Secondary Contours, and Triangulation Edges. To create a custom line
style, see
Object Styles on page 484.
NOTE If you clear the At Intervals Of check box, custom contour lines still display.
4 Under Section Graphics, do the following:
■ For Section Cut Material, select a material to use to display the site in a section view.
Appropriate materials include Site-Earth, Site-Grass, and Site-Sand.
■ For Elevation of Poche Base, enter a value to control the depth of the cross-section of earth
(for example, –30 feet or –25 meters). This value controls the poche depth for all topography
elements in your project.
5 Under Property Data, do the following:
■ Specify an option for Angle Display. If you select Degrees, property lines display in the
Property Lines bearings table using the 360-degree bearing standard. Property line tags display
using the same notation.
■ Specify an option for Units. If you select Decimal degrees, the angles in the Property Lines
bearings table display as decimals rather than as degrees, minutes, and seconds.
6 Click OK.
To see the results of your changes to contour line settings, open a site plan view. To see the results of your
changes to the section cut material, open a section view.
Site Settings Properties
Description Name
Displays contour lines. If you clear the check box, custom contour lines still display
in the drawing area. Contour Line Display
Sets the interval between contour lines. At Intervals Of
892 | Chapter 13 Working with Site Components