Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 690 / 1646

2 Click Modelling menu
➤
Ceiling, or on the Modelling tab of the Design Bar, click Ceiling.
3 In the Type Selector, select a ceiling type.
4 Click inside a room to place the ceiling.
A ceiling appears is displayed; you can modify it at any time. See Modifying Ceilings on page
654.
Sketching a Ceiling
1 Open a Ceiling Plan view.
2 Click Modelling menu
➤
Ceiling, or on the Modelling tab of the Design Bar, click Ceiling.
3 On the Options Bar, click Sketch.
There are 3 ways to sketch a ceiling:
■ pick walls
■ draw using sketch tools
■ use Auto Ceiling
To sketch a ceiling by picking walls
1 On the Design Bar, click Pick Walls.
2 On the Options Bar, specify an offset, and select Extend into wall (to core) to measure the offset
from the core layer of the wall.
3 Select the faces of the walls that form the boundary of the ceiling.
NOTE To select a chain of walls, highlight a wall, press TAB until chain of walls or lines displays in
the status bar, and click.
4 On the Design Bar, click Ceiling Properties.
5 In the Element Properties dialog, designate the type of ceiling and its properties, and click OK.
6 On the Design Bar, click Finish Sketch.
To sketch a ceiling by drawing
1 On the Design Bar, click Lines, and on the Options Bar, click Draw.
2 Use the sketching tools to complete the ceiling sketch, which must be a closed loop.
To create an opening in the ceiling, sketch another closed loop within the main loop.
NOTE You can also use Pick Lines on the Options Bar to sketch the ceiling. Picking lines is not the
same as picking walls.
3 On the Design Bar, click Ceiling Properties.
4 In the Element Properties dialog, designate the type of ceiling and its properties, and click OK.
5 On the Design Bar, click Finish Sketch.
To sketch a ceiling using Auto Ceilings
1 On the Design Bar, click Auto Ceiling.
2 Place the cursor in a room.
The boundary of the room is highlighted.
652 | Chapter 11 Working with Architectural Components