Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 709 / 1646

2 Click the blue flip control arrows.
Zero Tread Thickness for Monolithic Stairs
You can set the tread thickness of monolithic stairs to 0.
1 In the Type Properties dialog of the stairs, under Construction, select Monolithic Stairs.
2 Under Risers, clear the End with Riser parameter.
3 For Riser Thickness, enter 0.
4 For Tread Thickness, enter 0.
Stair Properties
You can modify several properties for stairs, including the top and base levels, calculation rules, and stair
labels.
NOTE If you are upgrading stairs from a previous release of Revit Architecture, and you do not see all of the
parameters listed here, duplicate your stair type from the Element Properties dialog, and then you should see all
of the parameters.
Modifying Stair Properties
1 If you are in sketch mode, on the Design Bar, click Stairs Properties. If you are in a plan view,
select the stairs, and click .
2 In the Element Properties dialog, edit stair instance parameters.
See Stair Instance Properties on page 674.
3 Click Edit/New to edit stair type parameters.
See Stair Type Properties on page 671.
NOTE Changes made to type parameters affect all stairs of this type in the project. You can click
Duplicate to create a new stair type.
4 Click OK.
Stair Type Properties
Description Name
Construction
Click Edit to set the stair calculation rules. See Stair Calculator on page 667. Calculation Rules
Stair Properties | 671