Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 364 / 1646

■ When changing a wall’s type, the Match tool copies Base Offset, Unconnected Height, Top Extension
Distance, and Base Extension Distance from the source wall type to the target wall. If the target wall is
on the same level as the source wall, then the values for Top Constraint and Top Offset are also copied.
Changing the Line Style of Elements
Use the Linework tool to quickly change the line style for selected edges of model elements in a view.
For example, you can use the Linework tool to do any of the following:
■ Differentiate cut edges and projection edges of the model.
■ Hide selected edges (by applying an Invisible line style).
■ Reveal edges of elements that exist in the model, but are hidden in the view.
■ Differentiate the edges of a building in an elevation view.
■ Differentiate edges in an imported CAD file or a linked Revit file.
Linework Overview
The Linework tool does not create new model or detail lines in the view. Instead, it overrides the current
line style of the selected line and applies a different line style. For information about defining and modifying
line styles, see
Line Styles on page 485.
You can use the Linework tool to change the line style of the following:
■ Projection edges of model elements, including silhouette edges and projection edges caused by plan
regions
Red linework applied to projection edges of a
roof
■ Cut edges of model elements
326 | Chapter 7 Editing Elements