Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 641 / 1646

Location line does not move when it is the origin point
Wall Properties
Walls have properties based on whether they are interior or exterior walls. You can modify the properties
of one wall type and set them for all walls of that type. For example, if you set properties for a basic interior
wall type, then all interior walls assume those property values. You can also select an instance of a wall and
change its parameters only.
NOTE Be aware that the type names do not update upon changing parameters. For example, you could set the
width of a 200 mm exterior wall to 250 mm and its name will not change.
Wall Type Properties
Description Name
Construction
Click Edit to create compound walls. See Compound Structure on page 748. Structure
Sets the layer wrapping of walls at inserts. See Layer Wrapping on page 751. Wrapping at Inserts
Sets the layer wrapping of wall end caps. See Setting Layer Wrapping on page 752. Wrapping at Ends
Sets the width of the wall. Width
Sets a wall to exterior, interior, retaining, foundation, or soffit. Before creating the
wall, you can click , and you see the default instance values for wall function.
Wall Function
See Adding Interior and Exterior Walls on page 562 and Adding Retaining Walls on
page 564. The value should be set to Soffit when the wall is attached to a ceiling. In
this case, the attachment is made to the surface of the ceiling, regardless of the
shape of the ceiling.
Wall Properties | 603