Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 199 / 1646

To unhide hidden elements:
2 Select the element.
3 Do one of the following:
■ On the Options Bar, click Unhide Element or Unhide Category.
■
Right-click the element, and click Unhide in View
➤
Elements or Category.
■ Click View menu
➤
Unhide in View
➤
Elements or Category.
NOTE The Unhide Element and Unhide Category options become active when you select an element
that was hidden by element or, a category that was hidden by category.
4 On the View Control Bar, click to exit Reveal Hidden Elements mode.
Temporarily Hiding or Isolating Elements or Element Categories
Temporarily hiding or isolating elements or element categories may be useful when you want to see or edit
only a few elements of a certain category in a view. The Hide command hides the selected elements in the
view, and the Isolate command shows the selected elements and hides all other elements in the view. The
command affects only the active view in the drawing area.
Element visibility reverts back to its original state when you close the project, unless you make the changes
permanent. Temporary Hide/Isolate also does not affect printing.
To temporarily hide or isolate elements or element categories:
1 In the drawing area, select one or more elements.
2 On the View Control Bar, click (Temporary Hide/Isolate) and then select one of the following:
■ Isolate Category: in other words, if you select some walls and doors, only walls and doors
will remain visible in the view.
■ Hide Category: hide all selected categories in the view. If you select some walls and doors,
all walls and doors will be hidden in the view.
Hiding Elements in a View | 161