Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 335 / 1646

Specifying the number of elements in the array
The completed linear array
Creating a Radial Array
1 Select one or more elements to be copied in an array.
2 Click Edit menu
➤
Array, or click on the Edit toolbar.
3 On the Options Bar, click (Radial).
4 Select the desired options, as described for creating a linear array.
TIP When you create a radial array, the steps are similar to rotating a component and copying it.
See Rotating Elements on page 308.
5 Drag the center of rotation symbol to the desired location.
The array members will be placed around an arc measured from this point. In most instances,
you want to drag the center of rotation symbol away from the center of the selected elements.
The symbol snaps to points and lines of interest, such as walls and the intersections of walls
and lines. You can also drag it onto open space.
6 Move the cursor to a position where the arc of the radial array will begin. (A line radiates from
the center of rotation symbol to the cursor position.)
NOTE If you want to specify the angle of rotation (instead of drawing it), specify an Angle value on
the Options Bar and press ENTER. Skip the remaining steps.
7 Click to position the first ray of rotation. If the cursor snaps while specifying the first ray, the
snap line rotates along with the preview box and snaps to angles on the screen while placing
the second ray.
Creating an Array | 297