Autodesk 24000-000000-9860 - Revit Architecture - PC, Руководство пользователя

Страница: 303 / 1646

3 Click to complete the loop.
Modifying Sketched Elements
1 On the Design Bar, click Modify.
2 Select a sketched element.
3 If the element was created in sketch mode, on the Options Bar, click Edit.
4 Modify the element:
then If you want to
select all of its sketch lines, and drag it to the desired
location. If another element is attached, it updates
accordingly. move an entire element
select it, and either drag the end control or edit the
dimension. If you are moving the end control of a modify the end of a sketch line
straight line segment, you can change the angle of
the line or change the length of the line. If you move
the end control of an arc, you change the number of
degrees for the arc angle; if you drag the middle
control, you change the radius.
5 If you were in sketch mode, when finished, click Finish Sketch.
Sketching and Work Planes
Each view in Revit Architecture is associated with a work plane. In some views (such as plan, 3D, and drafting)
and for views in the Family Editor, the work plane is automatically set. In other views, such as elevation and
section views, you need to set the work plane. The work plane is necessary for sketching operations such as
creating an extruded roof, and for enabling tools in particular views, such as Rotate and Mirror in a 3D view.
When you set a work plane in a view, it is saved with that view. You can change the work plane as necessary.
When sketching, you can snap to the work plane grid, but you cannot align or dimension to it.
Setting the Work Plane
1 Click Tools menu
➤
Work Plane
➤
Set Work Plane, or click on the toolbar.
Modifying Sketched Elements | 265