2-15-(6)
EC Defect
Section 2-15
CHECK
This setting will be enabled only if Frame/Field under Camera image is set to
Frame. If set to Field, the effect will remain the same as if 5
5 is selected
even if 3
3 is selected.
The greater the mask size, the more the variations in surrounding pixels can
be absorbed. Select 5
5 to ignore uneven edges.
CHECK
This function is even more effective if smoothing is used.
SeeAlso
Refer to
,QSXWWLQJ&DPHUD,PDJHV
and
)LOWHULQJ$JDLQ
(where smooth-
ing can be set to be executed twice).
Select 3
3 to detect small defects or burrs. If 5
5 is selected, the edges
might be absorbed as uneven edges and defects may not be detected.
1.
Select Extract edges.
Example: Select 3
3
Information from the surrounding 9 pixels is
used to determine whether or not the
center pixel is the edge. (1 square = 1 pixel)
1.EC defect
Measurement image
Extract edges
Removal regions
Removal image
Inspected regions
Coordinate mode