2-5-(9)
Binary Position Compensation
Section 2-5
2.
Select either Correct or Clear and press the ENT Key.
If Correct is selected, the cursor will be displayed. Correct the size and po-
sition of the figure as desired.
If Clear is selected, the selected figure will be cleared.
STEP 4: Re-registering Reference Values
This operation is performed when only the reference values are to be re-regis-
tered.
When a measurement region is drawn, the measurement is performed for the
displayed image and the results are registered as the reference values. If the
re-registering function explained here is used, only the reference values for the
image currently displayed will be registered. The area and center of gravity are
registered for the reference values.
1.
Select Reference registration.
A cursor will appear at the position of the center of gravity.
2.
To change the position, use the Up/Down and Right/Left Keys to move
the cursor.
3.
Press the ENT Key.
The setting will be registered and the screen in (1.) will return.
STEP 5: Setting the Judgement Conditions
Make settings for the area and center of gravity.
Position0(Gravity and area)
Binary
Measurement conditions
Region
Reference registration
Judgement conditions
Detailed conditions
Clear
Reference registration
ENT:Set :Move
251,184
Reference position
Measurement region