2-20-(12)
Pattern
Section 2-20
2-20-3
Setting Detailed Conditions
The search settings can be changed here. Change the conditions if the mea-
surement results are unstable. Normally, these conditions can be left on the
default settings. After changing the settings, perform an object measurement
to check that measurement can still be performed correctly.
1.
Select Pattern.
A list of settings selections will be displayed.
2.
Select Detailed conditions.
The Detailed Conditions Settings Screen will be displayed.
3.
Change the settings.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.Pattern
2.
1.Pattern
Measurement conditions
Select region
Detailed conditions
Coordinate mode
Detailed conditions
End
Verification
Candidate level
:OFF
: [ 60]