4-(13)
Backing Up Data
Section 4-2
10. Select Execute.
A screen showing the transfer progress will be displayed.
11. Select Transfer/Receive File from the Hyper Terminal menu on the com-
puter.
12. Specify where the file is to be saved.
13. Set the protocol to Xmodem or Zmodem.
14. Select Receive.
When XModem is selected, enter the file name.
The data will be transferred from the Controller to the computer.
When the transfer has been completed, the screen in (7.) will return.
Loading Data from the Computer
1.
Follow steps 1 to 3 in the above procedure to connect the Controller and
the computer.
SeeAlso
Refer to
%DFNLQJ8SWRD3HUVRQDO&RPSXWHU
.
2.
Select Transfer/Send File from the Hyper Terminal menu.
3.
Select the file to be sent.
4.
Set the protocol to Xmodem or Zmodem.
5.
Select Send.
The data transfer screen will be displayed.
Saving data.
System data Save
Personal computer
Data
Controller