2-24-(20)
Lot Number OCV 1
Section 2-24
Setting Items and Contents
Setting
Contents
Lot-No. digits
Set the number of digits in the lot number. (1 to 4, 3*)
Set to a value at least as large as the number of digits in the
maximum lot number. If a smaller value is set, it will be
increased automatically to the number of digits in the maximum
lot number.
Lot-No. default
Set the initial value of the lot number. The default will be set as
the numbers printed on the reference date and then incre-
mented according to the add method. (0 to 9999, 1*)
Lot-No. max.
Set the maximum lot number. The lot number will be reset to the
default when the maximum value is exceeded and it will be
incremented again. (0 to 9999, 365*)
Lot-No. add value
Set the value to be added to the lot number each cycle defined
by the add method. (0 to 9999, 1*)
Lot-No. add method
Set the period at which to increment the lot number. Lot num-
bers will be calculated as follows based on the built-in calender.
(Day*, Week, Month, Year)
Day:
The lot number will be incremented every day.
Example: 1 OCT 2001 to 2 OCT 2001
Week:
The lot number will be incremented every week.
Example: 1 OCT 2001 to 8 OCT 2001
Month:
The lot number will be incremented every month.
Example: 8 OCT 2001 to 1 NOV 2001
(Days are ignored.)
Year:
The lot number will be incremented every year.
Example: 1 OCT 2001 to 1 JAN 2002
(Months and days are ignored.)
0 suppress
Set whether initial zeros are present or not when the lot number
does not require all of the digits. (OFF*, ON)
Example: If the number of digits is 3 and the lot number is 4,
turn OFF suppression when “4” is printed and turn ON suppres-
sion when only “004” is printed.
Extract mode
Set the mode to use to extract numbers. (Auto*, Fixed)
Auto: The number with the specified number of digits is auto-
matically extracted from the inspection region.
Fixed: Inspected regions are drawn separately for each digit to
extract numbers. This enables verifying the position of individual
digits.
