2-9-(16)
Circle Position Compensation
Section 2-9
The screen for specifying the radius will be displayed.
4.
Specify the size of the circle.
Left Key:
Decreases the size.
Right Key: Increases the size.
5.
Press the ENT Key.
The screen for registering the size of the model will be displayed.
6.
Adjust the size of the model.
Right Key: Increases the size horizontally.
Left Key:
Decreases the size horizontally.
Down Key: Increases the size vertically.
Up Key:
Decreases the size vertically.
When the size of model 0 is adjusted, models 1 to 3 will also change to the
same size.
7.
Press the ENT Key.
A settings screen for the rotation positioning range will be displayed.
Model registration
70
Model registration
39,39
Model registration
100