1-(60)
Basic Operations
Section 1-6
1-6-5-2
Test Measurement
Use the following procedure to execute measurements according to the condi-
tions set for the scene currently displayed. The test is completed internally by
the Controller and the measurement results are not output via serial or parallel
interfaces. The measurement commands can be input, however, via serial or
parallel interfaces.
SeeAlso
Refer to SECTION 6 Communicating with External Devices.
1.
Press the TRIG Key on the Console or input the measurement command
from an external device.
Measurement will be executed and the measurement results displayed on
the screen.
1-6-5-3
Changing Results Display
Detailed measurements results can be displayed on the screen in Monitor or
Run mode. This is useful when adjusting measurement conditions.
1.
Press the SHIFT+ESC Keys.
The screen for changing the measurement display settings will be dis-
played.
Image 0 freeze
OK 67ms
0.Scn 0
MON
Overall judgement
Measurement time
Image 0 freeze
0.Scn 0
MON
NG
67ms
End
Image 0 freeze
Image status
Freeze(Before scroll)
Display image
Image size
Display results
0.Scn 0
MON
:
:Image0
: All
:
None
NG
67ms