2-15-(16)
EC Defect
Section 2-15
If Clear is selected, the selected figure will be cleared.
STEP 4: Setting the Radius of the Circle
Set the radius and the permissible radius range for the circle to be removed.
If the circle search is set to OFF, the center of the circle will be the position
specified here.
1.
Select Radius.
The Input Figure Screen will be displayed.
2.
Specify the center of the circle.
Up/Down/Left/Right Keys:
Move the cursor.
ENT Key:
Confirms the setting.
The Radius Settings Screen will be displayed.
3.
Set the radius of the circle.
Up/Right Keys:
Increase the radius.
Down/Left Keys: Decrease the radius.
ENT Key:
Confirms the setting.
Removal region0(Circle)
Circle color
Search conditions
Removal region
Radius
Latitude of angle
Clear
Input figure
251,365
100
Input figure