2-22-(18)
Rotation Positioning
Section 2-22
2-22-3
Changing Detailed Conditions
Use this operation to change the search-related settings. Change the condi-
tions if the measurement results are unstable. Normally, however, the default
settings are sufficient.
Once the settings have been changed, check that actual measurement is per-
formed correctly.
1.
Select Rotate position.
A list of settings selections will be displayed.
2.
Select Detailed conditions.
The Detailed Conditions Settings Screen will be displayed.
3.
Change the settings.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
0.Scn 0=SET=
0.Camera image
1.Rotate position
2.
A
1.Rotate position
Measurement conditions
Select region
Detailed conditions
Coordinate mode
Detailed conditions
End
Verification
Candidate level
: OFF
: [ 60]