1-(6)
Installing the Application Software
Section 1-3
1-3-2
Selecting Installation Processing Items
The F250-UME has many processing items. Select the processing items
required for the application. Refer to SECTION 2 Processing Items Setting
Procedures for an outline of each processing item.
1.
Select Select items.
A list of processing items will be displayed.
2.
Move the cursor to the item to be installed.
3.
If that item is “OFF,” press the ENT Key.
The selections (ON/OFF) will be displayed.
4.
Select ON.
5.
Repeat this process to set to ON the processing items to be installed and
set to OFF the items that are not to be installed.
6.
Select END.
The settings will be registered and the screen in (1.) will return.
Set up
Select items
Install
Backup data load
Clear memory
Select items
Input Image
Camera image
Switch camera
Change Filtering
Filtering again
Position Compensation
Binary pos. comp
Model pos. comp
End
ON
ON
ON
ON
OFF
OFF
Select Items
Input Image
Camera image
Switch camera
Change Filtering
Filtering again
Position Compensation
Binary pos. comp
Model pos. comp
End
ON
ON
ON
ON
OFF
OFF
ON
OFF
