6-2-(50)
Normal Serial Interface
Section 6-2
Measurement
Binary Defect (Measurement Data)
Note
The upper left and lower right coordinates of the calculated measurement
region will be output whenever Area (Variable Box) is set for any of the regions
0 to 7. These coordinates will be output in pixels regardless of the setting for
calibration.
Binary Defect (Settings Data)
Data
Details
Measure-
ment
data
0
Judgement result
-2: Not measured.
-1: NG
0: OK
1
Region 0
Judgement result
2
Region X 1 (See note.)
3
Region Y 1 (See note.)
4
Region X 2 (See note.)
5
Region Y 2 (See note.)
6
Gravity X
7
Gravity Y
8
Axis angle
9
Area
10
Reversed area
11
Reference position X
12
Reference position Y
13
Reference angle
14
Reference area
15
Region 1
Judgement result
to
... (Same as for region 0)
99
Region 7
Judgement result
to
... (Same as for region 0)
111
Reference angle
112
Reference area
Data
Details
Settings
data
120
Measurement image
0: Image 0
1: Image 1
121
Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
122
Binary level (common) upper limit (0 to 255)
123
Binary level (common) lower limit (0 to 255)
124
Reverse binary level (common)
0: Not reversed
1: Reversed
