4-(2)
Changing Scenes and Scene Groups
Section 4-1
4-1
Changing Scenes and Scene Groups
The different situations (types of measurement object and types of measure-
ments required) in which measurements are performed are called “scenes”
and the measurement conditions set in Set Mode are called “scene data.” The
scene function can be used to set 32 types of measurement conditions. If
detection conditions change, simply switch scenes to change to a different
measurement setup.
The normal limit of 32 scenes may not be possible for some settings if there is
insufficient memory. A message will appear on the screen if there is insuffi-
cient memory. Make the region smaller or delete unnecessary regions or mod-
els.
CHECK
Up to 1,024 scenes can be stored if a 128-Mbyte Memory Card is inserted into
Memory Card slot 1. Up to 32 scenes make up a scene group and up to 32
scene groups can be set, i.e., 32 scenes x 32 scene groups = 1,024.
Scene group 0 will be saved in the internal flash memory and scene groups 1
to 31 will be saved to the Memory Card.
0
1
30
31
0
1
30
31
1
2
Controller
Controller
If a Memory Card is not used, only Scene group 0 can be used.
Scene group 0
Scene 0
Scene 1
Scene 30
Scene 31
Scene groups 1 to 31 can be used if a Memory Card is mounted.
Scene group 0
Scene 0
Scene 1
Scene 30
Scene 31
Scene 0
Scene 1
Scene 30
Scene 31
Scene group 31
Memory Card
(128 Mbytes)
Always mount the
Memory Card to
Memory Card slot 1.
1,024 scenes max.
Scene group 0:
Saved to internal flash memory
Scene groups 1 to 31: Saved to Memory Card