2-5-(12)
Binary Position Compensation
Section 2-5
A confirmation message will be displayed.
2.
Select Execute.
The settings will be cleared and the initial screen for binary position com-
pensation will be displayed.
2-5-2-2
Position Compensation with Gravity and Axis
Density images taken by the Camera are converted into binary images made
up of black and white pixels and then measured. The size (area), position
(center of gravity), and axis angle of the white-pixel area is calculated.
STEP 1: Setting the Binary Level
Set the level for converting 256-gradation images into binary images. Mea-
surements are performed for the white pixels. Therefore, make the settings so
that the measurement object is white.
1.
Select either Position compensation 0 or Position compensation 1.
Region will be cleared.
Execute
Cancel
1.Binary pos. comp
Measurement image
Position compensation 0
Position compensation 1
Direction
1
2
3
4
5
(As required)
Set the
judgement
conditions.
Change
pixel
skipping.
Draw the
region.
Re-register
the
reference
values.
(As required)
Set the
binary
level.
1.Binary pos. comp
Measurement image
Position compensation 0
Position compensation 1
Direction
