2-20-(4)
Pattern
Section 2-20
2-20-2
Setting Measurement Regions
Up to 64 regions can be set.
STEP 1: Registering the Model
The area of the image to be inspected is registered as a model.
When a model is registered, the center position of the model is registered as
the search coordinates. When several figures have been combined in the
drawing, the center coordinates of circumscribing rectangle becomes the
search coordinates.
CHECK
Regions can be created by combining up to 3 different figures. Regions with
difficult shapes can be drawn and sections not to be measured can be left out
of the region by combining different figures.
1.
Select Pattern.
The settings selections will be displayed.
1
2
3
4
(As required)
Register
model.
Change
search
coordinates.
Set search
region.
Set
judgement
conditions.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.Pattern
2.
1.Pattern
Measurement conditions
Select region
Detailed conditions
Coordinate mode
