2-21-(22)
QUEST Character Verification
Section 2-21
2-21-5
Setting Regions
Operational Flow
STEP 1: Selecting Character Extraction Mode
There are two character extraction modes: The Auto Extraction Mode, where
characters within the specified region are extracted automatically, and the
Fixed Region Mode, where regions are set with fixed positions for each char-
acter.
Up to 4 regions can be set. Select the extract mode for each region.
1
2
3
Select
character
extract
mode.
Set
inspection
region.
Set
character
string.
End
Mode
Mode: Auto extraction
Type of 1st line
Not specifying
Type of 2nd line
Not specifying
01.11.07
K B - 6 5 7 6 2
KB-657 6
:
:
Dictionary setting:
Specifying: Numerals are matched only with the
numeral dictionary models and letters are matched
only with the alphabet dictionary models.
Not specifying*: Characters are matched against all
dictionary models.
Auto Extraction
Fixed region
Inspection region
Characters are extracted automatically from this region.
Two lines of up to 20 characters per line can be extracted.
Inspection region
The inspection region is set for each character. Up to 20 characters
can be set.
Verification can be performed to check if a particular character is at
a particular position.
