2-22-(5)
Rotation Positioning
Section 2-22
2-22-2
Setting Measurement Regions
Up to 8 measurement regions can be set.
STEP 1: Registering a Model
The area of the image to be inspected is registered as a model.
When a model is registered, that orientation becomes 0
°
and the center posi-
tion of the model is registered as the search coordinates. When several figures
have been combined in the drawing, the center coordinates of the circumscrib-
ing rectangle become the search coordinates.
HELP
Refer to
7HUPLQRORJ\
for information on models.
CHECK
Models can be created by combining up to 3 different figures. Regions with dif-
ficult shapes can be drawn and sections not to be measured can be left out of
the region by combining different figures.
1.
Select Rotate position.
The settings selections will be displayed.
2.
Select Select region.
The region numbers will be displayed.
1
2
3
4
(As required)
Register
model.
Change
search
coordinates.
Set search
region.
Set
judgement
conditions.
0.Scn 0=SET=
0.Camera image
1.Rotate position
2.
A
1.Rotate position
Measurement conditions
Select region
Detailed conditions
Coordinate mode
Select region
Region0
Region1
Region2
Region3
Region4
Region5
Region6
Region7
