2-17-(3)
Edge Position
Section 2-17
2-17-1
Selecting Measurement Images
This section describes how to select an image stored at either Image 0 or
Image 1 as the image for measurement.
1.
Select Edge position.
The setting selections will be displayed.
2.
Select Measurement Image.
The selections will be displayed.
3.
Select which image will be used for measurement, the image stored at Im-
age 0 or the image stored at Image 1.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.Edge position
2.
1.Edge position
Measurement image
Select region
Coordinate mode
Measurement image
Image0
Image1