2-27-(8)
Edge Pitch
Section 2-27
2-27-6
Setting the Coordinate Mode
Select the type of coordinates.
CHECK
If the coordinate mode is changed after the judgement conditions have been
set, the measurement results will change also. Change the judgement condi-
tions to enable correct measurement.
1.
Select Coordinate mode.
The Coordinate Mode Settings Screen will be displayed.
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Coordinate mode
The asterisk (*) indicates the default setting.
Calibration : OFF
End
ON:
Output made using coordinate values
set using calibration.
OFF*:
Output made using Camera coordinate values.
0.Edge pitch
Measurement conditions
Region
Judgement conditions
Detailed conditions
Coordinate mode
Coordinate mode
Calibration : OFF
End