2-7-(2)
Edge Position Compensation
Section 2-7
2-7-1
Selecting Measurement Images
This section describes how to select an image stored at either Image 0 or
Image 1 as the image for measurement.
1.
Select Edge pos. comp.
The initial Edge Position Compensation Screen will be displayed.
2.
Select Measurement image.
The selections will be displayed.
3.
Select which image will be used for measurement, the image stored at Im-
age 0 or the image stored at Image 1.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
0.Camera image
1.Edge pos. comp
2.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
Measurement image
Position compensation 0
Position compensation 1
Direction
Measurement image
Image0
Image1