2-31-(1)
Get Unit Data
Section 2-31
2-31
Get Unit Data
The Get Unit Data processing item is used to obtain one piece of processing
item data (measurement result, settings parameter, etc.) set in a flowchart.
Example: Obtaining Binary Level Automatically Set for QUEST Character
Verification
Set the data to be obtained.
1.
Select Get unit data.
Data no. will be displayed.
2.
Press the ENT Key.
The screen for selecting the unit and data numbers will be displayed.
Item
Details
Unit
Select the number of the unit for which the processing item data is
to be obtained.
Data
Select the number of the data to be obtained. The data number
will differ between processing items.
The data numbers are the same as for UNITDATA for serial inter-
faces (Normal).
0.Scn 0=SET=
0.Camera image
1.QUEST OCV
2.Get unit data
3.
Unit: [1. Quest OCV]
Data: [903] (Lower limit of binary level
0.Scn 0=SET=
0.Camera image
1.QUEST OCV
2.Get unit data
3.
ENT:Set SFT+ESC:Edit
Data no.
Unit
Data
:
:
1.QUEST OCV
[903]
End
